2017-07-10

IEC/EN 60950-1: Information technology equipment — Safety — Part 1: General requirements.資訊技術設備－安全性－第1部：一般要求。


本法規分為八章節，分別為：

Sec. 0 Principles of safety

Sec. 1 General

Sec. 2 Protection from hazards

Sec. 3 Wiring, connections and supply

Sec. 4 Physical requirements

Sec. 5 Electrical requirements and simulated abnormal conditions

Sec. 6 Connection to telecommunication networks

Sec. 7 Connection to cable distribution systems


關於IEC/EN 60950-1法規版本我司於2011-07擷取歐盟官方網站最新資料於下表，其中這類產品新舊版差異較大為2.5 LPS test condition及3.5.4 data port的要求。(http://ec.europa.eu/enterprise/policies/european-standards/documents/harmonised-standards-legislation/list-references/low-voltage/index_en.htm)

Reference and title of the harmonised standard

(and reference document)

Reference of

superseded

standard

Date of cessation of

presumption of

conformity of

superseded standard

Note 1

EN 60950-1:2006

Information technology equipment - Safety -- Part 1: General requirements

IEC 60950-1:2005 (Modified)

EN 60950-1:2001+ A11:2004

Note 2.1

Date expired

(01/12/2010)

EN 60950-1:2006/A11:2009

Note 3

Date expired

(01/12/2010)

EN 60950-1:2006/A1:2010

IEC 60950-1:2005/A1:2009 (Modified) (new)

Note 3

01/03/2013

Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European Standardisation Organisation, but attention ofusers of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.


IEC/EN 60950-1 規章主要是適用於mains-powered or battery-powered 資訊產品 (含商業電子設備) 及其週邊產品，且額定電壓低於600V。在IEC/EN 60950-1的條文內，主要是在防止人體 (泛指使用者及服務人員) 受到：觸電 (Electric shock)、危險能量 (Energy hazards)、火災 (Fire)、機械及熱的危險(Mechanical and heat hazards)、幅射危險 (Radiation hazards)、化學的危險 (Chemical hazards)、材料及零件 (Materials and components) 的傷害。

若貴公司現有申請CB的需求，目前IEC 60950-1 2nd 有兩種版本

  1. 比較常用的是IEC 60950-1:2005，IEC 60950-1: 2005 (2nd Edition) and/or EN 60950-1: 2006+A11:2009 (因目前國際間通用性問題，如有需轉證，建議使用此版本)

  2. 另一種是IEC 60950-1/A1:2009 (Amandment 1版本) IEC 60950-1: 2005 (2nd Edition) ); Am 1:2009 and/or EN 60950-1: 2006+A11:2009+ A1:2010與前者差異唯有在條文、寫法及測試標準有些微不同。

雖然IEC 沒有像EN的Standard有失效的問題，不過目前IEC 60950-1: 20011st 已經不再發證書，而在國際轉證上可能有些國家不接受，所以建議還是申請IEC 60950-1:20052nd。